Case studybipbus
A bus display you glance at, not an app you open.
bipbus is a 7.5-inch e-ink display for the home. It shows real-time arrivals for up to 3 nearby stops and hour-by-hour weather, and it can beep when it's time to leave. STM, RTL and exo buses.
- Status
- On sale at bipbus.ca: $199.99 CAD plus taxes, shipping included, no subscription.
- Role
- All the software and the new packaging, solo, on off-the-shelf display hardware.
- Built with
- ESP32-S3
- Arduino
- PlatformIO
- GxEPD2
- Python
- FastAPI
- GTFS-Realtime
- Shopify
The problem
A transit app needs a phone unlocked and an app opened, right when you are putting your boots on. bipbus is always on and readable at a glance from across the room, with no app and no account.
What was built
- The screen: the next 3 arrivals, with real-time and scheduled trips told apart, a line diagram with live bus positions, and service notices such as detours.
- Indoor and outdoor temperature in the header, and a weather page with now, the next 6 hours and Environment and Climate Change Canada warnings.
- An optional leave alert, set per stop, that chimes when it's time to go.
- Setup in two steps from a phone: join the display's own Wi-Fi network by scanning a QR code, then pick stops on bipbus.ca with a one-time code.
- Signed over-the-air firmware updates, released in stages, with automatic rollback.
- The packaging: a printed sleeve over the maker's box, a bilingual quick-start card and a warranty card.
How it works
- A FastAPI server reads the agencies' real-time feeds (GTFS-Realtime). The display never calls the agencies, and their API keys never leave the server.
- Polling follows demand: a stop is fetched only while a display has asked for it in the last 15 minutes. Displays are identified by hashed tokens, and no IP addresses or stops are logged.
- Each display downloads a compact summary of about 0.6 KB per stop.
- The ESP32-S3 firmware has its own small HTTPS client that resumes TLS sessions across deep sleep, which brought a typical wake-up from 5–6.7 s down to about 3 s.
- During commute hours the display wakes every 60 seconds and sleeps longer otherwise. Times change with a partial refresh, and the whole screen redraws every 10 updates.
Independent product. Not affiliated with STM, RTL or exo.